Beipu devices upgrades and spare parts (2025)
Beipu devices advice for Slovakia, covering mg per ml, what to look for and where the trade-offs actually sit.
Anyone who has compared beipu devices options in Slovakia quickly learns that specification lists only tell part of the story. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Finding the right beipu devices in Slovakia is easier than most catalogues make it sound. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber. The Midnight Black finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
We would pair the Innokin X with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Micro-USB takes about 64 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 8.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 480 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Innokin X |
|---|---|
| Brand family | Geekvape |
| Battery capacity | 1500 mAh |
| Power range | 50 W |
| Liquid capacity | 8.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | 510 bottom pin |
| Airflow | mesh window |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Slovakia
Availability in Slovakia is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Availability shifts often, so check the current listing before committing to a large order.
