Slovakia Beipu devices comparison chart: Compared (v2)
Beipu devices advice for Slovakia, covering kit contents, what to look for and where the trade-offs actually sit.
The gap between a mid-range and a premium beipu devices narrows once you know which components you actually use. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation.
Finding the right beipu devices in Slovakia is easier than most catalogues make it sound. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
In Slovakia, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself. The wide bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 70:30 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Charging over Micro-USB takes about 51 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 1200 mAh cell holds a usable charge for most of a day at 200 and recharges over Micro-USB.
What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber. The Lilac Mist finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. We would pair the RELX Pro with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Vapour production is more than adequate at 200, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 1515 full puffs from a charge at 10 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
Specifications
Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.
| Reference model | RELX Pro |
|---|---|
| Brand family | Joyetech |
| Battery capacity | 1200 mAh |
| Power range | 200 W |
| Liquid capacity | 3.5 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 70:30 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | dual bottom |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Frozen Berry Sorbet: sweet, icy, described as cold berry inhale with a soft exhale. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Slovakia
Availability in Slovakia is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
