How we test Beipu devices in Slovakia (Vaporesso Tarot)
Beipu devices advice for Slovakia, covering spare parts, what to look for and where the trade-offs actually sit.
We spent weeks putting beipu devices options through their paces so the recommendations here reflect real use. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
The gap between a mid-range and a premium beipu devices narrows once you know which components you actually use. Expect roughly 1163 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Two things to check before ordering: the Micro-USB socket on the base and whether the 0.8 Ω regular coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 4000 mAh cell holds a usable charge for most of a day at 80 and recharges over Micro-USB. We would pair the RELX Pro with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 60:40 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Micro-USB takes about 83 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 80, and pushing beyond that adds heat rather than anything worth carrying. We would pair the RELX Pro with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Expect roughly 1163 full puffs from a charge at 0 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 0.8 Ω regular coil is the sensible default to keep in stock. Pricing in Slovakia shifts with import duty, so the figures here reflect current EUR rates rather than a fixed list price.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | RELX Pro |
|---|---|
| Brand family | KangerTech |
| Battery capacity | 4000 mAh |
| Power range | 80 W |
| Liquid capacity | 1.6 ml |
| Coil | 0.8 Ω regular |
| Bottle size | 1.6 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | Q-Plus |
| Airflow | ring control |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Cherry Lime Soda: sweet, tart, described as red cherry with a lime lift. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω regular mark before the coil begins to mute it.
Practical considerations in Slovakia
Availability in Slovakia is the factor that decides most outcomes here. Confirm the 0.8 Ω regular and the Micro-USB are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.